Features & Benefits
• PID controller with auto-tuning to ensure rapid heating, minimum temperature fluctuation and overshoot.
• Push-button operation and LED screen display digitally both the set and actual temperatures to ±0.1°C and can be locked.
• Auto diagnostic system integrated in the controller ensures rapid identification and correction in the event of any error.
• Off-set function for calibration use. Important for ISO/Calibration requirement.
• Back-up system memory protects the set point value in case of power failure.
• Detachable controller – can be used on any suitable size containers.
• With built-in circuit breaker to ensure safe and lasting operation.
• Stirring motor ensures temperature uniformity throughout the bath.
• Manufactured by a factory certified to ISO 9001:2015
• Type tested to MS IEC 61010-1:2006 Standard Electrical Safety Test.
| MODEL | 830-P1 |
|---|---|
| Bath material | Perspex |
| Temp. working range | 5°C above ambient temperature to 65°C |
| Temp. control range | 0°C to 100°C. Below ambient with external cooler |
| Controller | PID controller |
| Setting and display | Digital, read out to 0.1°C |
| Accuracy | ±0.1°C |
| Sensor | PT-100 |
| Safety device | Complete with circuit breaker as standard |
| Heater | 960 watt |
| Stirring | By means of built-in circulating pump |
| Bath capacity | 10 litres |
| Bath dimensions (mm) | 128W x 455D x 195H |
| Working area (mm) | 128W x 225D x 195H |
| Overall dimensions (tank only) (mm) | 145W x 470D x 225H |
| Weight | 6.3 kg |
| Power source | 240 VAC, 50Hz, 4A |
